Parts

Invert smoothes your ride and gives unbelievable control of your bike on rough roads, loose turns, and steep descents. It’s surprisingly lightweight, easy to use, and strikingly attractive. Riding beyond the pavement can be rough, physically taxing, and unpredictable. Invert goes straight to the source of this problem to offer a smoother ride with more traction, both uphill and down. With Invert, you’ll be more efficient, more relaxed, and have confidence to glide over gravel like you’ve never experienced before. - Inverted design promotes smoothest possible operation, lightest weight, & cleanest visual integration by using a layout opposite to conventional suspension forks - Features Climb Switch that engages a firm setting for out of the saddle pedaling - Gravel-Specific? tuned, progressive air spring balances traction with the right amount of support and is fully adjustable for rider weight (Max Weight: 350 lb / Max PSI: 250 psi) - Premium carbon fiber crown and steerer is bonded to aluminum upper tubes to provide an incredibly strong and lightweight fork (1113 g) - Flat-Mount disc for 160mm rotor (Mounting bolts included) - Integrated 36-degree angle crown race - Included with fork: Ancora Premium Expansion Plug, 52mm ZN40 headset bearing, Brake caliper mounting bolts, and Thru-Axle - Hand-built in Fletcher, NC

Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

The award-winning 36 continues its all-mountain domination with a reinforced chassis to handle the increased loads of eMTB and World Cup EDR-E racing. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. - GRIP X damper exudes exemplary descent performance, refined for less weight, easier setup, and easy access firm mode for pedaling efficiency - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - An additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increasing stiffness, and boosting performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve the goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added smoothness and durability

The award winning 36 continues its all-mountain domination with a reinforced chassis to handle the increased loads of eMTB and World Cup EDR-E racing. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. - GRIP X2 is the most tunable, supportive and smoothest descent-focused damper FOX has created, so riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction, and experience reduced fatigue - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increasing stiffness, and boosting performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added smoothness and durability

Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. - GRIP X damper exudes exemplary descent performance, refined for less weight, easier setup, and an easy access firm mode for pedaling efficiency - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increasing stiffness, and boosting performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added smoothness and durability

Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. - GRIP X2 is the most tunable, supportive, and smoothest descent-focused damper FOX has created, so riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction, and experience reduced fatigue - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increases stiffness, and boosts performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve the goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added smoothness and durability

The most versatile fork in our lineup, Lyrik harmonizes descending power with effortless efficiency. Lyrik’s legendary performance enters a new era with the Charger 3.1 RC2 damper that offers a wider tunable range of adjustments for the perfect suspension action. Lyrik Ultimate packs an orchestra of industry-leading tech like the ButterCups technology and a DebonAir+ air spring in a stout 35mm chassis. Now better than ever, Lyrik is ready to push your limits. FEATURES - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in the Signature colorway Heavy Meadow Green or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

The most versatile fork in our lineup, Lyrik harmonizes descending power with effortless efficiency. Lyrik’s legendary performance enters a new era with the Charger 3.1 RC2 damper that offers a wider tunable range of adjustments for the perfect suspension action. Lyrik Ultimate packs an orchestra of industry-leading tech like the ButterCups technology and a DebonAir+ air spring in a stout 35mm chassis. Now, better than ever, Lyrik is ready to push your limits. Features: - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High high-speed compression, Low low-speed compression, and Low low-speed rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2's adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in NEW Electric Red Signature colorway or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

The drivetrain embraced by core riders as the All Day best friend is now available in Transmission. The no-compromise, budget minded ethos remains built into the system but is modernized for a new generation of bikes. The GX Eagle Transmission derailleur every bit as crisp and precise as the other derailleurs in the transmission family, but features things like removable skid plates for better protection and serviceability. Shifting under load is made possible on the GX cassette due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The GX Eagle Transmission DUB crankset stands apart and gives no-nonsense riders a no-compromise balance of form and function. It’s the crankset where pure performance meets optimal value. Its unique shape has been forged out of aluminum for strength without bulk. Its available composite removable bashguards add functionality and lets riders manage scuffs and scrapes that come with the territory. The GX Eagle Transmission (T-Type) chain is the strongest we have ever made. Specifically engineered to optimize Eagle Transmission, this all-new T-Type design features a unique flat top, and is developed specifically for the added torque loads of E-MTB thanks to its solid pins that give it incredible strength. - Available with 165, 170, 175mm crankarm and 32T chainring - Bashguard compatible - GX Eagle Transmission derailleur - 10-52T GX Eagle Transmission cassette - GX Transmission Flattop chain - Pod controller - AXS battery/charger

Designed for cyclists with exacting standards, X-Track Dual Power pedals are the perfect option to get the most out of each training session and race, whether you're riding an MTB or gravel bike. With a power meter inside each axle, they provide accurate data in all conditions, including the most extreme, and feature a market-leading weight/contact area ratio. Approved by experienced athletes, they are hard-wearing, reliable, efficient and Made in France: the perfect pedals on any terrain. - Dual power transducers for accurate, comprehensive data - An accurate power meter in a pair of efficient SPD compatible pedals - Aluminum body, Stainless Steel platform and steel bearings - Lightweight (404 g) with all-terrain efficiency - Installed and set up in minutes - Totally weatherproof and splashproof - Standard Cleat included with 6 - 14Nm retention - 3 year warranty

- 38mm chassis for increased stiffness and rider confidence - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height. - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature - Includes premium short fender

The XX SL T-Type Eagle AXS™ Power Meter carbon crankset boasts SRAM's XX SL T-Type crank arm with an integrated power meter to record and deliver live, accurate power readings to your head unit. Utilizing an all-new spider-based design, this is SRAM's most accurate, high performing power meter. The new spider design uses a proprietary chainring mount system which allows reduced weight without compromising reliability. A dual sided power measurement system calculates total watts - it’s subtle, lightweight, and boasts a long battery life. It is also compatible with the RockShox Flight Attendant system, allowing for total connectivity between all AXS™ enabled components. No-compromise, high-performance data delivery giving you an edge over the competition.

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

Packed with features to dominate the descents, the 36 Performance Elite answers the call from aggressive all-mountain riders. Trail and all-mountain riders no longer need to choose between a descent-focused damper or a lightweight endurance damper. The GRIP X damper exudes exemplary descent performance, refined for less weight, easier setup, and easy access to firm mode for pedaling efficiency. - GRIP X damper exudes exemplary descent performance, refined for less weight, easier setup, and easy access to firm mode for pedaling efficiency - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increases stiffness, and boosts performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Black anodized upper tubes for added durability

Trail riders have long had to choose between over-forking for stiffness or under-forking for lower weight. The 36 SL Factory suspension fork takes the new 36 chassis and saves weight at strategic locations, creating a no-compromise lightweight fork for today’s hard-hitting—yet shorter travel—Trail riders. Features Kashima Coating on upper tubes for added smoothness and durability. - New generatively designed arch and crown shaping increase torsional stiffness by 20% over 34, while minimizing weight increase - New compliant air spring design reduces chassis friction - New double-butted damper side stanchion sheds grams - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction - New easier to operate, low-profile bleeders

FOX 38 Performance Elite Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions. - GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology, which allows for external fine-tuning of suspension performance - 29: 762mm peak tire diameter - Next generation FLOAT EVOL with a larger negative air chamber increases small bump sensitivity - Floating axle design provides much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - Equipped with a quick-release lever-operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviate air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding - Direct mud guard mount - 27.5: 723mm peak tire diameter

Ultra-versatile, super capable, lightweight on the scales, heavy on the attitude—this is Pike. Not afraid of the rooty chutes. Unintimidated by the calf-crushing climbs. We’ve updated our trail-capable legend with the new Charger 3.1 RC2 damper. Along with vibration-killing ButterCups, this damper offers better traction, comfort, and control. With more tunable range, Charger 3.1 enables riders to set up the perfect suspension action for their preferences. A fork designed to level up your trail game. Experience the legend. Features: - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butter-like small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in NEW Electric Red Signature colorway or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

Ultra-versatile, super capable, lightweight on the scales, heavy on the attitude—this is Pike. Not afraid of the rooty chutes. Unintimidated by the calf-crushing climbs. We’ve updated our trail-capable legend with the new Charger 3.1 RC2 damper. Along with vibration-killing ButterCups, this damper offers better traction, comfort, and control. With more tunable range, Charger 3.1 enables riders to set up the perfect suspension action for their preferences. A fork designed to level up your trail game. Experience the legend. FEATURES - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butter-like small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in the Signature colorway Gloss Silver or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

The drivetrain embraced by core riders as the All-Day best friend is now available in Transmission with full e-bike compatibility. The no-compromise, budget minded ethos remains built into the system but is modernized for a new generation of e-bikes. The GX Eagle Transmission derailleur every is every bit as crisp and precise as the other derailleurs in the transmission family, but features things like removable skid plates for better protection and serviceability. Even on an e-bike you are now able to shift under load thanks to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. It also features a revised 10-52T range, making even the longest climbs easy. The GX Eagle Transmission crankset stands apart and gives no-nonsense riders a no-compromise balance of form and function and is available in dedicated variants for different motor manufacturers. It’s the crankset where pure performance meets optimal value. Its unique shape has been forged out of aluminum for strength without bulk. Its available composite removable bashguards add functionality and lets riders manage scuffs and scrapes that come with the territory. The GX Eagle Transmission (T-Type) chain is the strongest we have ever made. Specifically engineered to optimize Eagle Transmission, this all-new T-Type design features a unique flat top, and is developed specifically for the added torque loads of E-MTB thanks to its solid pins that give it incredible strength. - Dedicated variants with SRAM/Brose and Bosch for optimized q-factor - 160, 165 and 170mm lengths - ISIS interface for use with ISIS systems - GX Eagle Transmission derailleur - 10-52T GX Eagle Transmission cassette - GX Transmission Flattop chain - Pod controller - AXS battery/charger

36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included

The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. - Compression and midvalve circuit offer increased support and control - SKF oil seal head cartridge and wiper seals are low friction - The redesigned air spring offers increased air volume for better traction and suppleness - The threadless air seal head allows for easier travel change - Damping features include: high speed compression, low speed compression, and low speed rebound - Adjustment options include: high speed compression (10 positions), low speed compression (17 positions), Low speed rebound (10 positions), independent positive air spring, independent negative air spring, and an indexed travel system (8 positions) - Double-Air spring system: high volume positive and negative air springs - "D-Loc" 15mm bolt-on thru axle

Invert smoothes your ride and gives unbelievable control of your bike on rough roads, loose turns, and steep descents. It’s surprisingly lightweight, easy to use, and strikingly attractive. Riding beyond the pavement can be rough, physically taxing, and unpredictable. Invert goes straight to the source of this problem to offer a smoother ride with more traction, both uphill and down. With Invert, you’ll be more efficient, more relaxed, and have confidence to glide over gravel like you’ve never experienced before. - Inverted design promotes smoothest possible operation, lightest weight, & cleanest visual integration by using a layout opposite to conventional suspension forks - Gravel-Specific tuned, progressive air spring balances traction with the right amount of support and is fully adjustable for rider weight (Max Weight: 350 lb / Max PSI: 250 psi) - Premium carbon fiber crown and steerer is bonded to aluminum upper tubes to provide an incredibly strong and lightweight fork (990 g) - Flat-Mount disc for 160mm rotor (Mounting bolts included) - Integrated 36-degree angle crown race - Included with fork: Ancora Premium Expansion Plug, 52mm ZN40 headset bearing, Brake caliper mounting bolts, and Thru-Axle - Hand-built in Fletcher, NC

We’ve fit the same outstanding stiffness, durability and weight savings of the eeWings mountain cranks into the slimmer road bottom bracket standard. This includes road, gravel and cyclocross configurations. - eeWings All Road 170mm, 172.5mm or 175mm - 30mm Spindle - 10 Year Warranty"

Take flight with the eeWings from Cane Creek. These titanium cranks are designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness and weight. - eeWings Mountain 165mm, 170mm or 175mm - 30mm Spindle - 10 year Warranty

Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 326g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 320g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - 27.5” and 29” wheels - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - MC² bladder cartridge damper offers adjustable high-speed compression damping, low-speed compression damping - Expansion bladder with patent-pending blow-off valve compensates for oil displacement, with lower friction than a traditional internal floating piston - 37mm chassis with torsional stiffness up to 30% higher than similar forks from competitors - Dorado Air spring features an enlarged negative air chamber for linear initial stroke and reduced IRT volume for progressive end stroke - Internally adjustable travel from 180mm to 140mm

XC courses are more technical than ever with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance, and svelte sub-1500g weight, the new 34 SL Factory suspension fork is built to exceed the demands of modern XC and downcountry. Features Kashima Coating on upper tubes for added smoothness and durability - Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase - 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) - Longer air spring than 34 SC with larger negative volume mirrors 34 LT’s supple initial stroke and 34 SC’s supportive mid and end stroke - Double-butted damper side stanchion for weight savings - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction