Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools/Maintenance

$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
$28.00
- Fits Truvativ ISIS bottom brackets with 8-notch flanged cups (also fits crank spider nut on older X-Flow and Stylo crankarms) - CNC machined, heat treated steel construction - 1/2" ratchet drive and 32mm wrench flat tool interfaces
$8.99 - $147.15
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$15.05 - $33.34
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$19.95
Don't let a broken chain put your bike out of commission. Topeak's Super Chain Tool is a great addition to seat packs and home tool boxes alike. It's made of hardened steel and includes 5 and 6mm Allen wrenches, a chain hook and a chain tool.
$20.00
- 5 DART plugs for use with the Stan's NoTubes DART tool
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
$11.00 - $29.99
Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic
$74.00
Shimano Genuine Professional disc brake bleed kit Includes: - TL-BR002 Funnel unit for ST series Road Brake lever (M7 thread bleed port) - TL-BR003 Funnel unit for BL series MTB brake lever (M5 thread bleed port) - TL-BR001 Syringe unit - 4-pcs set of Bleed Blocks (Piston spacer) Features: - New oil spill guard lid with an integrated oil stopper holder - Improved syringe unit design now using a stronger threaded tube joint and revised locking clip - Bleeding instructions available for download under 'Documents & Links' below
$49.00
200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Rings Seals) - 35 Gold RL A1 (2020+)
$11.00 - $24.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
$49.00
- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings
$18.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$20.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) -Judy Gold and Silver (2018+)
$55.00
- RockShox, 11.4118.038.002, Service kit, Monarch Plus B1 2014+
$7.00
RockShox, 00.6815.066.010, Reverb oil height tool
$5.00 - $25.00
Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.
$9.99
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously
$37.99
The hex wrench is the most common tool needed for the modern bicycle. Choosing the right set can make the difference between good day and a bad day working on bikes. Pedro's L Hex Wrench Set is up to the challenge. They made these wrenches from heat-treated SNCM-V alloy steel to ensure superior strength and long-lasting performance. Pedro's hex wrenches also feature extra length and a round-style end for better leverage and easy access and handling of hard-to-reach bolts. The set includes all the sizes you need in a convenient holder. - Made from heat-treated SNCM-V alloy steel to ensure long-lasting performance - Extra length provides great leverage and access to hard-to-reach bolts - Includes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10mm sizes in convenient holder
$28.95
Prepares surface, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound. Notice: Must be used on all component, fastener and carbon fiber surfaces in conjunction with threadlockers and retaining compounds that contact carbon fiber such as PF30 bottom brackets or brackets or bearings pressed into carbon fiber frames. Failure to do so could result in permanently bonded parts.
$15.95
Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.
$42.95
Bottom brackets have some of the highest torque specs of any component found on a bicycle. Despite this, some bottom bracket cups feature tool fittings that allow mere millimeters of engagement, which can be a problem when attempting removal or installation. Solution: the Park Tool Bottom Bracket Tool Retaining System. Used in conjunction with nearly any Park Tool bottom bracket tool, the BBT-RS uses a spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. The BBT-RS can be configured for use with the vast majority of threaded and thread-together bottom bracket standards. The BBT-RS features an M8 threaded rod and a double-sided adapter nut with M12 and M15 threads, allowing it to thread directly into any compatible cartridge bottom bracket. The M15 adapter can also be used to install any of Park Tool's nine aluminum bottom bracket tools, all of which feature integrated threading for use with the BBT-RS. - Washer diameter: 57 mm (2.25") - Rod length: 175 mm (6.9") - Rod threading: M8 x 1.0 - Adapter nut threading: M12 x 1.0 & M15 x 1.0 Compatible with the following bottom bracket styles: - Threaded cup - Thread-together - Cartridge - Cup-and-cone Compatible with the following bottom bracket tools: - The following Park Tool socket-style aluminum bottom bracket tools: - BBT-27.3 - BBT-35-12 - BBT-35-36 - BBT-47-12 - BBT-47-16 - BBT-49.3 - BBT-59.3 - BBT-69.3 - BBT-79.3 - Wrench-style bottom bracket tools with a handle (e.g. Park Tool BBT-9, BBT-29, HCW-4) - Bottom bracket tools with external wrench flats (e.g. Park Tool BBT-19.2, BBT-22)
$10.95
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
$15.95
Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.
$19.95
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
$10.95
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
$8.95
12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.
Page 1 of 49 Next page